Why is My Electric Blanket Flashing

Home » Electric Blanket » Why is My Electric Blanket Flashing

Have you ever wondered why your electric blanket flashes? It’s actually a very simple process that happens when the electricity passes through the wires in your blanket. The reason it looks like it’s flashing is because the current is pulsing on and off at a rapid rate.

This happens because the electric blanket is controlled by a switch that regulates the amount of electricity that flows through the blanket. When you turn on the switch, it sends a signal to the controller that tells it to start heating up the wires in the blanket. The controller then turns on the current and starts heating up the wires.

As the wires heat up, they expand and contract slightly, which causes them to emit light.

If you’ve ever woken up in the middle of the night to a bright, flashing electric blanket, you’re not alone. It’s a common problem that can be caused by a few different things. First, make sure that your electric blanket is plugged into an outlet that’s not controlled by a switch or timer.

If it is, the switch or timer could be causing the problem. Next, check to see if your electric blanket is wrapped tightly around anything. It shouldn’t be touching anything but the bed itself.

If it is touching something else, like another piece of bedding or a pillow, that could be what’s causing the issue.

See also  Are Sunbeam Electric Blanket Controllers Interchangeable
Finally, take a look at the cord of your electric blanket. If it’s frayed or damaged in any way, that could be what’s causing the problem.

Replace the cord if necessary and see if that fixes things. If you’ve tried all of these things and your electric blanket is still flashing, it might just be old and need to be replaced. Electric blankets don’t last forever!

Sunbeam Electric Blanket Flashing Red Light

If you own a Sunbeam electric blanket, you may have noticed that the red light on the control panel flashes when the blanket is first turned on. This is normal and indicates that the blanket is working properly. The red light will stay on for a few minutes and then turn off, indicating that the blanket is warm and ready to use.

If the red light starts flashing again after being turned off, it means that the blanket is no longer warm and needs to be reset.

Why is My Electric Blanket Flashing

Credit: apmusicales.com

How Do You Fix a Blinking Heated Blanket?

If your heated blanket is blinking, it may be experiencing a power surge. To fix this, simply unplug the blanket and plug it back in. If the problem persists, you may need to replace the fuse.

Why Does My Electric Blanket Flash P?

If your electric blanket is flashing the letter P, it means that there is a problem with the heating element. This could be caused by a loose connection, a damaged wire, or a faulty controller. If you see this error message, you should unplug the blanket and contact the manufacturer for further troubleshooting.

See also  How Much are Electric Blankets at Walmart

How to fix your heated blanket flashing red light

Conclusion

If you’ve ever woken up in the middle of the night to a flashing electric blanket, you’re not alone. While it may be alarming at first, there’s usually no need to worry. In most cases, the cause of a flashing electric blanket is simply a loose wire.

If your electric blanket is flashing, start by checking all of the connections. Make sure that the power cord is plugged into both the wall outlet and the blanket itself securely. If everything appears to be plugged in correctly, unplug the power cord from the wall outlet and then plug it back in again.

This can sometimes reset the connection and stop the flashing. If your electric blanket continues to flash after trying these troubleshooting tips, it’s best to contact customer service for further assistance. It’s possible that there is a more serious issue with your blanket that will require professional help to fix.