How to Reset Sunbeam Electric Blanket

Home » Electric Blanket » How to Reset Sunbeam Electric Blanket

If your Sunbeam electric blanket is not working properly, you may need to reset it. Resetting the blanket will clear any errors and return the blanket to its default settings.

  • Unplug the electric blanket from the wall outlet and remove any batteries
  • Inspect the electric blanket for any signs of damage, such as burns, frayed wires, or cracks in the fabric
  • If you find any damage, do not use the electric blanket and contact Sunbeam for further instructions
  • Spread out the electric blanket on a flat surface and locate the control panel
  • Press and hold the “Reset” button on the control panel for three seconds
  • The reset button is usually red or black and is located near the power switch
  • Plug the electric blanket back into the wall outlet and turn it on to its lowest setting to test it before using it at full power

How to Fix Sunbeam Electric Blanket Blinking

If your Sunbeam electric blanket is blinking, it may be due to a loose connection. Check the connections at the control unit and make sure they are secure. If that doesn’t work, try resetting the control unit by unplugging it for 30 seconds and then plugging it back in.

How to Reset Sunbeam Electric Blanket


See also  How to Dry Electric Blanket

What Does It Mean When Sunbeam Electric Blanket Control Blinks?

When the control for your Sunbeam electric blanket starts blinking, it means that the blanket is not working properly. There are a few things that could be causing this problem. First, check to make sure that the power cord is plugged in securely.

If it is, then unplug the cord and plug it back in again. This will sometimes reset the blanket and get it working again. If this doesn’t work, then you may need to replace the control unit.

You can do this by contacting Sunbeam customer service or taking the blanket to a local repair shop.

How Do You Fix an Electric Blanket Control?

If your electric blanket isn’t working properly, there are a few things you can do to try and fix it. First, check the cords and connections to make sure they are all secure. Next, check the controller to see if the settings are correct.

If the blanket is still not working, you may need to replace the control unit.

What Causes Electric Blankets to Stop Working?

Electric blankets are one of the most popular ways to keep warm during the winter months. But what happens when your electric blanket stops working? There are a few possible reasons for this.

One reason your electric blanket may stop working is because the heating element has worn out. This is especially common in older blankets. The heating element is what produces the heat that keeps you warm, so if it’s not working, neither will your blanket.

See also  How Many Watts Does a Queen Size Electric Blanket Use

Another possibility is that a fuse has blown or a circuit breaker has been tripped. This can happen if there’s a power surge or if the blanket is accidentally left on for too long. Replacing the fuse or resetting the breaker should fix the problem.

Finally, it’s possible that something is wrong with the controller that regulates the heat output of the blanket. If this is the case, you’ll need to replace the controller in order to get your blanket working again. If your electric blanket isn’t working, don’t despair!

With a little troubleshooting, you should be able to figure out what’s wrong and get it up and running again in no time.

How Do I Reset My Sunbeam Heating Pad?

If your Sunbeam heating pad has stopped working, you may need to reset it. Here’s how: 1. Unplug the heating pad from the wall outlet.

2. Wait 30 seconds. 3. Plug the heating pad back into the wall outlet and wait for the indicator light to come on, indicating that it is reset and ready to use.

(2016) Sunbeam Electric Blanket Repair


Assuming you would like a summary of the blog post titled “How to Reset Sunbeam Electric Blanket”, here is a brief rundown of the steps: 1. Unplug the electric blanket and wait for it to cool completely. 2. Remove any blankets or bedding that may be on top of the electric blanket.

3. Find the control panel on the side or end of the electric blanket, depending on the model. 4. Locate the reset button on the control panel, which is usually red or black and marked with an “R” or a triangle symbol. 5. Press and hold down the reset button for three to five seconds until you hear a beep or see a flashing light, indicating that the electric blanket has been reset successfully.

See also  Is Static Electricity Dangerous in Blankets

6. Plug in the electric blanket and turn it back on to its original settings before using it again.