What's in This Guide?
There are many types and brands of electric blankets on the market, each with their own specific control unit. So, if you lose your control unit or it breaks, can you simply buy a replacement from any manufacturer and use it with your blanket? The answer is maybe.
It depends on the type of controls used.
If you’ve ever wondered if you can use the electric blanket control from one brand on a blanket from another, the answer is unfortunately no. Electric blanket controls are not interchangeable between brands or even between models from the same brand. So if you’re in the market for a new electric blanket, be sure to pick up a new control as well.
3 Prong Electric Blanket Cord
If you have an electric blanket with a three-pronged cord, you may be wondering what to do with it. Here are some tips on how to properly use and care for your cord:
-When using your electric blanket, make sure that the cord is not tangled or kinked.
This can cause the cord to overheat and potentially catch fire. -Do not place the cord under furniture or rugs, as this can also lead to overheating. -Make sure that the plug is fully inserted into the outlet before turning on the blanket.
-Never attempt to repair the cord yourself; if it is damaged, replace it immediately with a new one.
Are All Electric Blankets the Same?
No, not all electric blankets are the same. Some electric blankets have different features that make them more comfortable or easier to use than others. For example, some electric blankets have a built-in heater that warms up the blanket before you get in bed, while others do not.
Some electric blankets also have a timer so that you can set it to turn off after a certain amount of time, while others do not.
How Do You Fix an Electric Blanket Control?
Electric blankets are a great way to stay warm in the winter, but they can be a bit of a pain to deal with when they break. If you’re lucky, it’s just the control that needs to be replaced and not the whole blanket. Here’s how to fix an electric blanket control:
1. Start by unplugging the blanket from the outlet. You don’t want to accidentally electrocute yourself while working on this project! 2. Next, remove the batteries from the control unit.
This will help prevent any short circuits while you’re working. 3. Take a look at the wiring inside the control unit. If there are any frayed or broken wires, carefully snip them off and use electrical tape to secure any exposed wire ends.
4. Once you’ve dealt with any damaged wiring, reassemble the control unit and replace the batteries. Test it out by plugging in the blanket and turning it on to make sure everything is working properly again.
Why Does My Electric Blanket Have Two Controls?
If you have an electric blanket with two controls, it means that you can adjust the heat on each side of the bed independently. This can be really helpful if you share a bed with someone who has different temperature preferences than you do. Having two controls also allows you to save energy by only heating up the side of the bed that you are using.
How Do You Reset an Electric Blanket Controller?
An electric blanket controller regulates the amount of heat that is emitted from the electric blanket. If you find that your electric blanket is not providing enough heat, or if it is providing too much heat, you can reset the controller to adjust the level of heat.
To reset an electric blanket controller:
1. Locate the control unit for your electric blanket. This is usually a small box with a dial or knob on it. 2. Turn off the power to the electric blanket at the breaker box.
3. Unplug the power cord from the wall outlet. 4. Wait 30 seconds, then plug the power cord back into the wall outlet and turn on the power at the breaker box.
How to repair a controller for an electric heated blanket
Are Electric Blanket Controls Interchangeable?
Many people wonder if the controls for electric blankets are interchangeable. The answer is yes, as long as the electric blanket models are from the same manufacturer.
So, if you have two electric blankets from Sunbeam, the controls will be interchangeable. However, if you have an electric blanket from Sunbeam and one from another manufacturer, the controls will not be interchangeable.